Hioki 8860-50, Instruction Manual

Page: 200 / 490

7.4 Composite Waveforms (X-Y Waveforms)
188
Operating Key Procedure
5
Set whether to display or hide composite waveforms,
and display color.
SHEET/PAGE Select the [X-Y Comp] page.
CURSOR Move the cursor to the [Col] (Color) column for
the No. to be displayed.
F1 to F8 Select [On] to display the waveform.
When [On] is selected:
F1 to F8 Select the color to display.
6
Assign channels to the X and Y axes.
CURSOR Move the cursor to the [X-Axis] and [Y-Axis] col-
umns.
F1 to F8 Select the channels to display on the X and Y ax-
es.
7
Select the Graph for display.
(When Split-Screen is enabled for [2 Graphs] or more, or [Wave & 2
Comp] is selected)
CURSOR
F1 to F8 Move the cursor to the [Graph] column.
Select the graph number for display.
A sample of the Graph number (G1, G2, …) is
displayed at the left side of the screen.
8
Verify the composite waveform on the Waveform screen.
DISP The Waveform screen appears.
Off
The composite waveform is not displayed.
(default setting)
On
The composite waveform is displayed.
By selecting
F1 [All Settings]
in the [No.]
column, these settings can be made from
a dialog. (p. 189)
5 6 7
[2 Graphs] Case
To display a gauge
Press the FUNCTION MODE key to enable the FN mode, then press F2 [Gauge] .