Hioki 8860-50, Instruction Manual

Page: 410 / 490

15.1 General Specifications
398
(4) Memory Storage (optional, must be specified when ordering)
Capacity Model 8860-50:One of the following is required
Model 8861-50:Two of the same type are required
• Model 9715-50 Memory Board (32 MWord memory)
• Model 9715-51 Memory Board (128 MWord memory)
• Model 9715-52 Memory Board (512 MWord memory)
• Model 9715-53 Memory Board (1 GWord memory)
Expansion method Exchange installed memory boards
(5) Memory Storage Backup Function
(Model 9719-50 Memory Backup Unit: option must be specified when ordering)
Waveform backup time Model 8860-50:Approx. 10 hours
Model 8861-50:Approx. 5 hours
(after full charge, @25°C, 77°F)
Waveform backup power NiMH battery
Charger built-in (charges when power on, approx. 2 hours charge time)
(6) External Storage
PC Card
Slots 2 Slots, compliant with PC Card Standard specification
PC Card Types I and II accepted
Card types Flash ATA cards, Hard disk drive (HDD) cards
Data formats FAT and FAT32 supported
Storage contents • Setting configurations
• Measurement data (binary ASCII, BMP) (data between A-B cursors can be saved)
• Screen images (BMP)
• Calculation results
• Thinned storage (ASCII: simple thinning)
Hard Disk Drive (Model 9718-50 HD Unit: option must be specified when ordering)
Storage system 2.5-inch hard disk drive
Storage capacity 60 GB
Format FAT32
Storage contents • Setting configurations
• Measurement data (binary ASCII, BMP) (data between A-B cursors can be saved)
• Screen images (BMP)
• Calculation results
• Thinned storage (ASCII: simple thinning)