Hioki 8860-50, Instruction Manual

Page: 179 / 490

6.12 Making Trigger Settings on the Waveform Screen
167
6
Chapte
r 6
T
rigger Setting
s
The following trigger criteria settings can be made on the Waveform screen.
Press the
SUB MENU keys to select available setting items.
• Trigger Mode
• Pre-Trigger (Memory function and FFT function only)
• Analog Trigger (settings depend on the trigger type)
Use the CURSOR keys to move the cursor to each setting item, and select your
choice with the F keys.
6.12 Making Trigger Settings on the Waveform
Screen
1
Memory Function
REC&MEM Function
4
Analog Trigger Settings
5 7
10
6 8 9
1
Memory Function
2 3
"4.4 Setting Measurement Configuration on the Waveform Screen" (p. 114)
Measurement Configura-
tion and Trigger Settings
SUB MENU
key
11
1 4 5 7
10
Recorder Function
8 9
11
6
Setting Items Description
1
Function
2
Trigger Mode (p. 138)
Sets the trigger
mode.
Single, Repeat
or Auto
Single or
Repeat
Single, Repeat
or Timer
Single, Repeat
or Auto
3
Pre-Trigger (p. 140)
Sets pre-trigger-
ing.
-100 to 100%
(In steps of 1%,
or divisions)
(None)
-100 to 100%
(In steps of 1%,
or divisions)
-100 to 100%
(In steps of 1%,
or divisions)
4
Analog Trigger No. Selects the trigger number.
5
Analog Trigger Type
(p. 146)
Selects the analog trigger type.
6
Unit and Channel No. Selectable only when [Expanded] is selected.
7
Trigger Level Set the signal level (threshold voltage) for triggering.
8
Trigger Slope Select the slope (input signal rising

, falling

or both rising and falling

) for triggering.
9
Trigger Filter (p. 149) Sets the filter width (trigger filter) for triggering.
10
Events (p. 149) Sets the event count for triggering. (only with the [Expanded] setting)
11
Timing (p. 144)
Set the timing for triggered recording.
For Recorder function, set this when trigger timing is set to [Start &
Stop].
________