Hioki 8860-50, Instruction Manual

Page: 236 / 490

8.14 Searching a Waveform
224
Trigger Criteria Search
To open the screen: Press the
DISP
key

Waveform screen
Operating Key Procedure
1
FUNCTION MODE
F7
Display [FN] mode.
Select
[Search] .
The [SEARCH] dialog box appears.
2
Select the contents to find.
CURSOR
F1
Move the cursor to the [Method] item.
Select [Trigger] .
3
Select the search range.
CURSOR
F1 to F8 Move the cursor to the [Range] item.
Select either choice.
When recording with Memory Division (Memory
function and REC&MEM function)
4
Select the trigger search criteria.
(Trigger criteria settings for Analog No. 1 to No. 8, or Logic No. 1 to
No. 4)
CURSOR
F1 to F8
Move the cursor to the [Source] item.
Select either choice.
2
4
3
Whole
Searches all waveforms (default setting).
Block
(only for the Real-Time Saving function)
Searches the currently loaded measure-
ment waveform block.
AB Cursor
Searches between A/B cursors.
When only one cursor is enabled, search-
es forward from the cursor location.
Display Block
Searches within a currently dis-
played block. (default setting)
Display Block
AB
Searches between AB cursors in a
currently displayed block.
All Blocks
Searches all measured blocks.
All Blocks AB
Searches between AB cursors in all
measured blocks.
AND
Searches for the condition in which all
trigger criteria are met.
OR
Searches for the condition in which
any of the trigger criteria is met.
Select No.
Searches only using the currently dis-
played search criteria (default setting).
Because searching is timebase-depen-
dent, waveforms measured with different
timebases must be searched separately.
Select the timebase to search as the [Axis]
setting.
See "Select which timebase to search (if
measured using two timebases)." (p.
225)