Hioki 8860-50, Instruction Manual

Page: 349 / 490

12.6 Setting the Print Content
337
12
Ch
apter 12 Printin
g
Select whether to print titles (p. 118) and channel comments (p. 119) that you
have set in the Channel Settings screen, and settings data for the instrument.
12.6.5 Printing Comments and Setting Data
[Comment Printing Settings] field
Select whether to print titles and settings data (function, timebase,
time axis magnification or compression ratio, trigger times).
Select whether to print analog channel comments and channel set-
tings (measurement range, vertical-axis magnification and compres-
sion ratios, zero position, low-pass filter, full-scale value of range
(upper and lower limits when scaling or Variable is enabled).
Select whether to print comments for each logic channel.
(This example screen shows the default
values for all settings.)
Make the following settings as required.
Make settings on the
[Print Items] page of the Print Settings screen
1. Press the SUB MENU key and select the [Print] menu.
2. Press the SHEET/PAGE key and select the [Print Items] page.
Printing Titles and Measurement Conditions
To open the screen: Press the
SET
key

Select with the
SUB MENU
keys

Print Settings screen
See Screen Layout (p. 41)
Operating Key Procedure
1
SHEET/PAGE Select the [Print Items] page.
2
CURSOR
Move the cursor to the [Title] item.
F1 to F8
Select the content to print.
Off
Do not print.
Settings
Print the settings data of the instru-
ment (default setting).
Comments
Print title.
Set & Com
Print settings data and title.
Title
Settings data