Hioki 8860-50, Instruction Manual

Page: 252 / 490

9.2 Setting and Analysis Workflow
240
End of Measurement
Press the STOP key.
Recording stops after acquiring the specified length
(the green LED goes off).
Press twice to stop immediately.
Data Analysis
Analysis on the waveform screen.
See "Chapter 8 Waveform Screen Monitoring and Analysis"
(p. 191)
Loading files
When measurement is finished, data remains in instru-
ment memory. To display other data, load the index
(RSI) file from the Real-Time Saving function. The
whole waveform is displayed.
To display a measurement waveform, specify its loca-
tion within the whole waveform.
• To perform numerical or waveform calculations,
switch to the Memory function.
• To perform FFT analysis, switch to the FFT function.
Executing a waveform calculation clears the waveform
acquired by the Real-Time Saving function.
Saving Settings
(If you want to save data)
Make settings on the Save Settings screen, and
press the SAVE key to save.
Measurement data stored in memory by the Real-Time
Saving function is saved as Memory function data
(.MEM).
Press the SUB MENU s key to select the
menu
1
Specify the saving destination
2
Select what to save
Numerical calculation
Waveform calculation
FFT analysis
Select the FFT Function
Select the Memory function
Analysis on the
Waveform Screen
Real-time saving function
See "Chapter 11 Saving/Loading Data & Managing Files"
(p. 261)
1
2
Verify that storage media
has been inserted. Default setting:
[Selection Save]
SAVE