Hioki 8860-50, Instruction Manual

Page: 203 / 490

191
8
Chapter 8 W
av
eform Screen Monitoring
and Analy
sis
Waveform Screen Monitoring
and Analysis
Chapter 8
Open the Waveform screen
Analytical operations such as display magnification, compression, and search are available on the Wave-
form screen. Measurement configuration and related settings can also be changed.
About screen contents:
"2.4 Waveform Screen" (p. 19)
2
Select the Sheet
to display
1
Waveform Magnification/Compression
• Horizontal axis magnification/compression
(p. 211)
• Vertical axis magnification/compression
(p. 212)
• Magnification of partial data (Zoom) (p. 213)
• Arbitrary setting of vertical display range and
position (Variable function) (p. 215)
Waveform Scrolling (p. 192)
Display Switching
• Waveform display (Normal)
• Sheet switching (p. 175)
• Input level display (p. 199)
• Gauge display (p. 198)
• Info display of measured values, calculation
results and etc.(p. 196)
• Numerical values display (p. 221)
Cursor Measurements
• Specifying A/B cursors (p. 200)
• Time and frequency (vertical cursors) (p. 204)
• Voltage (horizontal cursors) (p. 206)
• Time and voltage (trace cursors) (p. 207)
Changing Settings on the Waveform
Screen
• Measurement configuration settings (timebase,
recording length, etc.)*
1
(p. 114)
• Input channel settings*
2
(p. 134)
• Trigger criteria settings*
1
(p. 167)
*1. Make settings at upper part of screen.
*2. Set in a dialog.
Memory Block Display
• Viewing waveforms in every block (p. 220)
• Overlaying reference waveforms (p. 111)
Searching Waveforms Displaying a Specified Location
(Jump Function) (p. 195)
• Trigger Search (p. 223)
• Time Search (p. 228)
• Maximum/Minimum Value Search (p. 229)
• Moving Cursor to Search Location (p. 195)
• Event Mark Search (p. 231)
• Moving to a Trigger Location
• Moving to a Searched Location
• Moving to a Cursor Location
• Moving to a Specified Location