Hioki 8860-50, Instruction Manual

Page: 235 / 490

8.14 Searching a Waveform
223
8
Chapter 8 W
av
eform Screen Monitoring
and Analy
sis
Measured data can be searched using the following trigger criteria.
8.14.1 Searching by Trigger Criteria
Trigger
Criteria Search
Example
Waveform content specifiable with
this search criteria
Reference
Level
Level (Lvl), Slope (Slp), Filter (Flt),
Event
"6.7.2 Triggering When Crossing a
Voltage Threshold (Level Trigger)"
(p. 150)
Win-In
Upper limit (Up), Lower limit (Low),
Filter (Flt), Event
"6.7.3 Triggering with Upper and
Lower Thresholds (Window
Trigger)" (p. 152)
Win-Out
Upper limit (Up), Lower limit (Low),
Filter (Flt)
"6.7.3 Triggering with Upper and
Lower Thresholds (Window
Trigger)" (p. 152)
In-Period Trigger
(Peri-In)
Level (Lvl), Slope (Slp), Filter (Flt),
Lower, Upper, Event
"6.7.4 Triggering by Period
Variance (Period Trigger)" (p. 153)
Out-of-Period
Trigger (Peri-Out)
Level (Lvl), Slope (Slp), Filter (Flt),
Lower, Upper, Event
"6.7.4 Triggering by Period
Variance (Period Trigger)" (p. 153)
Glitch
Level (Lvl), Slope (Slp), Width,
Event
"6.7.5 Triggering by Pulse Width
(Glitch Trigger)" (p. 155)
Slope
Level (Lvl), Slope (Slp), Width,
Event
"6.7.6 Triggering by a Variance
within a Specified Interval (Slope
Trigger)" (p. 156)
Voltage Sag
(Drop)
Level (Lvl), Frequency (Freq),
Event
"6.7.7 Triggering upon
Instantaneous Voltage Sag at
Commercial Mains Frequency (50/
60 Hz) (Voltage Sag Trigger)" (p.
158)
Logic
Filter, Trigger pattern (1 to 4)
"6.8 Triggering by Logic Signals
(Logic Trigger)" (p. 159)
S
S
S
S
S
S
S
S
S