Hioki 8860-50, Instruction Manual

Page: 208 / 490

8.4 Displaying Measured Values and Information
196
You can select the type of information (A/B cursor values, channel setting val-
ues) and the gauge display method to be displayed with waveforms. If the infor-
mation is obscured by overlapping waveforms, it can be displayed in a separate
screen region. However, these functions are available only when the Display
Type is set to
[Waveform] and the scrolling direction (Scroll) is [Horizontal] .
See "7.2.3 Setting the Display Type" (p. 177),
"7.2.5 Setting Waveform Scrolling Orientation" (p. 180)
Display Method Switching (Displaying Waveforms, Information and
Gauges Separately)
8.4 Displaying Measured Values and Informa-
tion
[Wave+Info]
Split display showing waveforms
and information separately
[Wave]
Normal Display
DISP
key
[Gauge+Wave]
Waveforms and gauge display
[All]
Split display showing waveforms,
information and a gauge separately
Press the DISP key repeatedly to change the display method.
Pressing the DISP key opens the Display dialog in which to select a display method. Selections in this
dialog are available using the F keys.
Press the
ESC key or an F key to close the dialog.
Display Dialog
The content of displayed infor-
mation can be switched.
(p. 197)
Displayed information may
include channel information
and calculation results.
Gauge
You can select which
channel the gauge
applies to.
(p. 198)
Input levels can be displayed on waveforms.(p. 199)
Display Method
(Select by F keys)