Hioki 8860-50, Instruction Manual

Page: 212 / 490

8.7 Specifying a Waveform Range
200
You can specify a waveform range using the A/B cursors to verify measurement
values between the cursors, save and print the range, or apply it to a partial com-
posite waveform.
Refer to the following for details:
• About reading measurement values and cursor types:
See "8.8 Cursor Values" (p. 202)
"8.8.1 About Cursor Types and Values" (p. 202)
• To save a specified waveform range (Partial Save):
Select [A-B] as the Save Area setting.
See "11.3.7 Automatically Saving Waveforms" (p. 282)
"11.3.8 Optionally Selecting Waveforms & Saving (SAVE Key)" (p. 285)
• To print a specified waveform range (Partial Print):
Select [A-B] as the Print Area setting.
See "Print Area Settings" (p. 328)
For manual printing, select [A-B Wave] as the Print Type.
See "Manual Print [Quick Print]" (p. 321)
8.7 Specifying a Waveform Range
Pressing this key repeatedly changes the speed of A/B
cursor motion (Slow, Medium or Fast).
Turn knob A to move cursor A.
Turn knob B to move cursor B.
2
1
Select the cursor type (Vertical, Horizontal, Trace, or Off).
The [A/B Cursor] dialog appears.
See "8.8.1 About Cursor Types and Values" (p. 202)
Specifying a range with the A/B cursors
Cursor A Cursor B
To specify a waveform range for purposes such as partial saving, printing, or
forming a composite waveform, select
[Vertical] or [Trace] .
Partial composition or calculation can be selected by the [Exec] button in the
A/B Cursor dialog.
Cursor position
can be verified.