Hioki 8860-50, Instruction Manual

Page: 240 / 490

8.14 Searching a Waveform
228
You can search recorded data for a specific time. The time to search for can be
specified as relative time elapsed after a trigger event, or as an absolute date
and time.
8.14.2 Searching by Time
Time Search
To open the screen: Press the
DISP
key

Waveform screen
Operating Key Procedure
1
FUNCTION MODE
F7
Display [FN] mode.
Select
[Search].
The [SEARCH] dialog box appears.
2
Select the contents to find.
CURSOR
F2 Move the cursor to the [Method] item.
Select [Time] .
3
Specify the time to find
CURSOR
F1 to F8
Move to the date field (to specify an absolute
time) or time from trigger [T] (relative time), and
set the time to find.
• To set by date
Set the recording date.
• Set the time from the trigger event.
When pre-triggering was enabled for record-
ing, you can specify time before the trigger
event.
Search
4
CURSOR
F1
Move the cursor to the [Exec] button.
Starts searching.
[Searching] appears on the Status bar, and the
locations where search criteria are satisfied are
displayed.
Search markers (
indicate locations where
search criteria are met.
To move a cursor to a found location
F4
or
F5
Select [Move Cur A] or [Move Cur B] .
To insert an event mark at a location where search
criteria are met.
CURSOR
F6
Move the cursor to the [Mark] button.
Select [Mark].
5
Close the search function.
F8 Select [Close] .
2
3
4
5
Select ( ) [Auto
Close] to have the dia-
log close automatical-
ly after searching.
S
Date field (to specify an absolute time)
Time from trigger [T] (relative time)
(T+: time after a trigger event, T-: time
before a trigger event)