Hioki 8860-50, Instruction Manual

Page: 481 / 490

Appendix 6 Disposing of the Instrument
A
55
Appe
ndix
Before Disposing of the Instrument
The instrument contains a lithium battery for memory backup. Remove this bat-
tery before disposing of the instrument.
Also remove the optional Model
9719-
50 Memory Backup Unit , if installed (p. A56) .
Appendix 6 Disposing of the Instrument
To avoid electric shock, turn off the power switch and disconnect the
power cord before removing the lithium battery and Model 9719-50 Mem-
ory Backup Unit (if the option is installed).
When disposing of the instrument, remove the lithium battery and Model 9719-
50 Memory Backup Unit (if the option is installed) and dispose of them in accor-
dance with local regulations.
1
2
3
4
6
7
8
5
9
Lead
Required tools:
Phillips screwdriver, wire cutter
One each
Box wrench or long-nosed pliers
Exploded View
Lithium Battery
Circuit
board
Lithium Battery Removal
Only when the optional
printer is installed
1
Verify that the power is off, and remove the connection cables and power cord.
2
Remove the screws and panels as indicated in the above diagram.
3
Pull the lithium battery up from the circuit board, and cut the two leads with a wire cutter.
4
Remove the battery from the board.
Screws
CALIFORNIA, USA ONLY
This product contains a CR Coin Lithium Battery which contains
Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
(Bottom Cover)