Hioki 8860-50, Instruction Manual

Page: 267 / 490

10.2 Setting and Analysis Workflow
255
9
Chapte
r 1
0 Long-T
erm Monitoring
and Inst
ant
ane
ous Recording
10
Measurement
Configuration Settings
Make settings on the Status Settings screen.
Press the SET key to open the Settings screen
Press the SUB MENU keys to select the
menu
1
Recorder waveform settings
Set the timebase and recording length.
2
Trigger mode (recording criteria) setting
Select Simple, Continuous or Timer
3
Memory waveform settings
Set the timebase (sampling rate) and record-
ing length.
The sampling rate is 1/100
th
of the timebase
setting. The Recorder waveform sampling rate
becomes the same.
Input Channel Settings
Make settings on the Channel Settings screen.
Press the SUB MENU keys to select the
menu
Press the
SHEET/PAGE
keys to select the
[One Ch] page
4
Select the Unit (module) and Channel
5
Select the measurement range (vertical axis)
Make input-module-related settings
6
Perform zero adjustment
7
(As occasion demands)
Set the scaling, waveform colors and
zero position
2
3
1
5
7
4
6
See "Chapter 5 Input Channel Settings" (p. 115),
"7.1 Making Input Waveform Display Settings (Analog
Waveforms)" (p. 170),
"Chapter 3 Input Channel Settings" in the Input Mod-
ule Guide
(after warm-up)