Hioki 8860-50, Instruction Manual

Page: 195 / 490

7.3 Displaying Logic Waveforms
183
7
Chap
ter 7 W
ave
form
Display Se
ttings
Settings such as those for measurement configuration are the same as for ana-
log waveforms.
Logic Waveform Display Setting Workflow
7.3 Displaying Logic Waveforms
[Use Ch] page on the Status Settings screen
• Enable the channels to use
(p. 86)
Select a measurement channel (Memory function and Real-time saving function only)
[Logic] page on the Channel Settings screen
Select which logic probes to display or hide, and their display colors
• Display/hide setting
(p. 184)
• Waveform display color setting
(p. 184)
(Default setting: Off)
[Logic] page on the Trigger Settings screen
Set logic triggers (if triggers are to be applied)
• Logic Trigger settings
(p. 159)
(Default setting: Off)
[Logic] page on the Sheet Settings screen
Set whether to display or hide logic channels, and the display position and display height for each
• Sheet Assignments
(p. 184)
• Display Position setting
(p. 185)
• Display Height setting
(p. 186)
(Default setting: On)