Hioki 8860-50, Instruction Manual

Page: 134 / 490

5.3 Monitoring Input Status
122
You can verify the input status and display range while making settings on the
Channel Settings screen.
This is not available while measuring.
Interpreting the Display _________________________________________
5.3 Monitoring Input Status
5.3.1 Verifying the Input Level (Level Monitor)
Measurement range judgment
Screen display range judgment
IN: in-range
OUT: out-of-range
Screen Display Range
The display range is affected by Waveform
Magnification, Zero Position, Scaling and
Variable settings.
(p. 170)
[One Ch] Page of Channel Setting Screen
Measurement Units of Input Waveform
Using the Scaling function (p. 123), measure-
ment units can be converted as desired for
display.
Acceptable Measurement Range
Current Input Signal Level
Current Input Value
Converted Input Value
(Appears only when the Scaling or
Vernier function is enabled)