Hioki 8860-50, Instruction Manual

Page: 115 / 490

4.3 Acquiring Waveforms Using the Utility Functions
103
4
Chapte
r 4
Me
asuremen
t Co
nfiguration Sett
ings
Description
When the Roll Mode is enabled ([On] or [Auto])
• The Roll Mode, Overlay (p. 104) and Averaging (p. 106) functions cannot both
be enabled at the same time. When the Roll Mode is enabled, the Overlay
function and Averaging function are automatically set [Off]. And setting Over-
lay and Averaging function [On] automatically turns the Roll Mode [Off].
• When Auto Print (p. 317) is enabled, printing is available simultaneously with
waveform display (if the internal printer is installed). However, for X-Y wave-
forms, all data must be acquired before printing.
When the Roll Mode function is disabled ([Off])
Waveforms are displayed after the data has been acquired for the entire record-
ing length, so with slow sampling there may be a long wait after starting mea-
surement before the waveform is displayed.