Hioki 8860-50, Instruction Manual

Page: 44 / 490

2.5 Settings Screen
32
2.5.2 Channel Settings Screen
Analog Channel Settings: [One Ch] page
Logic Channel Settings: [Logic] page (p. 34)
To open the Channel Settings screen
1
2
3
Press the
SET
key.
Press the
SUB MENU
keys
(The Settings screen appears.)
Press the
SHEET/PAGE
keys to select a page.
to select the menu item.
To make various settings with the All Channels list:
Comment settings: [Comment] page (p. 33)
Input Channel settings: [All Ch] page (p. 33)
Scaling settings: [Scaling] page (p. 33)
Variable Function settings: [Variable] page (p. 34)
Logic Input Settings (p. 183)
Make these settings when using a logic probe.
See "Chapter 3 Input Channel Settings" in the
Input Module Guide .
Level Monitor
Indicates the value and range
of input relative to the area
displayed on the waveform
screen for verification.
(p. 122)
All Channel Settings List
(p. 129)
Input Module Settings
(p. 116)
Set the input channels for the
installed input modules.
See "Chapter 3 Input Channel
Settings" in the
Input Module
Guide .
These settings are also avail-
able on the [All Ch] page
(p. 33).
Setting Unit (Module)
and Channel Nos.
Comment Setting (p. 118)
Make this setting to enter channel-specific comments.
This setting is also available on the [Comment] page
(p. 33).
Comments can be displayed on the Waveform
screen. See "13.1.2 Displaying or Hiding Comments"
(p. 351).
Input Waveform Settings (p. 170)
Set the waveform display color, zero position, vertical axis magnification and
display area. These settings are also available on the [All Ch] page (p. 33).
Variable settings can be made on the [Variable] page (p. 34).
Logic waveform settings can be made on the [Logic] page (p. 184).
[One Ch] Page
Set analog channels.
Scaling Settings (p. 123)
Make these settings to convert measurement units
for display as physical values when using a clamp
or external sensor. These settings are also avail-
able on the [Scaling] page (p. 33).