Hioki 8860-50, Instruction Manual

Page: 141 / 490

5.5 Verifying and Setting All Channels from a List
129
5
Chapte
r 5
Input Chan
nel Setting
s
All channel settings can be verified and changed on the following Channel
screen pages.
In addition, settings can be copied between channels.
(p. 133)
5.5 Verifying and Setting All Channels from a
List
Set analog channels (p. 116).
Set logic channels (p. 184).
Comment Settings List (p. 129)
Analog Channel Settings List (p. 130) Analog Channel Scaling Settings List (p. 131)
Analog Channel Variable (arbitrary magnifica-
tion of vertical axis) Settings List (p. 132)
Switch with the
SHEET/PAGE keys.
Comment Settings List: [Comment] Page
To open the screen: Press the
SET
key

Select with the
SUB MENU
keys

Select the [Comment]
page with the
SHEET/PAGE
keys
Analog Channel Comment List
(p. 119) Logic Channel Comment List (p.
119)
Using the CURSOR keys, move the cursor to the [Ch] column.
• To enter a title or comment:
Select F1 [Edit] to enter characters from the virtual keyboard.
See "Entering Text and Comments" (p. 66), "Comment Entry Example" (p. 120)
(If a keyboard is connected, you can press the F2 [Direct] key and enter from
the keyboard directly.)
• To copy settings from one channel to another:
Select F7 [Copy] .
Title comments can be entered
.
(p. 118)
This mark indicates
settings are valid.