Hioki 8860-50 Page 245 Instruction Manual Download

Page: 245 / 490

8.15 Inserting and Searching for Event Marks on a Waveform

233

Chapter 8 W

av
eform Screen Monitoring

and Analy

sis

8.15.3 Event Mark Editing

Enter a comment.
The entry method is the same as for channel
comments.

See

"3.3.3 Entering Text and Numbers" (p. 65)

Move the event mark (the displayed val-
ue is the same as that on the time axis).

The event mark moves to the cursor po-
sition.

Place the cursor on the row of the event number to edit, and press one of the F1 to F8 keys.

Deletes all event marks

To change the type or location, and to add or
delete an event mark

Adding a comment to an event mark

Displays the location of the event mark

Changes the event mark type (from 16 avail-
able types)

Adds an event mark (1,000 maximum)

Deletes the event mark

Repositioning an event mark

Cursor movement

Summary of Contents for 8860-50











































































































































































































































































































































































































































































































Search results

Summary of Contents for 8860-50

Reviews:

Related manuals for 8860-50

Brands by name

Popular brands

Hioki 8860-50, Instruction Manual

Search results

Summary of Contents for 8860-50

Reviews:

Related manuals for 8860-50

Brands by name

Popular brands