Hioki 8860-50, Instruction Manual

Page: 257 / 490

9.3 Pre-Measurement Settings
245
9
Chapter 9
Mea
suring with Real-T
ime Savi
ng
8
Operating Key Procedure
8
Select the recording method
CURSOR
Move the cursor to the [Trigger mode] item.
F1 to F8
Select the setting method for the recording
length.
Single
Record only once (default setting)
.
Repeat
Until you press the STOP key, recording
repeats at intervals of the set recording
length.
Timer
Recording begins and ends at the speci-
fied recording start and stop times.
Timer settings
The setting procedure is the same as for
the timer trigger.
See: "6.9 Trigger by Timer or Time Inter-
vals (Timer Trigger)" (p. 162)
Select each channel
To open the screen: Select with the
SUB MENU
keys

Channel Settings screen
See "Chapter 5 Input Channel Settings" (p. 115) and Input Module Guide
Set the waveform display
To open the screen:

Select with the
SUB MENU
keys

Sheet Settings screen
See "Chapter 7 Waveform Display Settings" (p. 169)
• When measuring with the Real-Time Saving function, Display sheet settings set with the Memory func-
tion are applied to the Real-Time Saving function.
• Sheet settings for the Model 8958 16-Ch Scanner Unit are canceled, so to measure with the Memory
function after measuring with the Real-Time Saving function, first reset the Sheet settings as occasion
demands.