Hioki 8860-50, Instruction Manual

Page: 197 / 490

7.3 Displaying Logic Waveforms
185
7
Chap
ter 7 W
ave
form
Display Se
ttings
The logic waveform display position can be set for each channel.
When recording a mix of analog and logic waveforms, overlapping of waveforms
on the display can be minimized by setting the display position and height.
Printing Position
When [Normal] or [Narrow] is selected, waveforms print at the same relative
positions as on the display. When [Wide] is selected, printing positions are as fol-
lows.
7.3.2 Setting the Display Position
Logic Waveform Display Settings
To open the screen: Press the
SET
key

Select with the
SUB MENU
keys

Sheet Settings screen
Operating Key Procedure
1
SHEET/PAGE
Select the [Logic] page.
2
CURSOR
Move the cursor to the [Position] column.
3
F1 to F8 Set the display position numbers of the wave-
forms.
Setting the display height affects the range that
can displayed. (p. 186)
• When the display height is set to [Wide] :
The highest number position that can be dis-
played is
[Pos 4] .
• When the display height is set to [Narrow] :
The highest number position that can be dis-
played is
[Pos 16] .
4
F3 Select [Set].
When a position number is duplicated by two
channels:
The position number of the duplicated channel is
automatically changed to another number.
Wide
Position
1
1
2
3
4
5
6
7
8
Normal
Display Height
Narrow
1
3
5
7
9
11
13
15
2
4
6
8
10
12
14
16
2
3
4
Display
Position 1
2
3
4
1
2
3
4
Print