Hioki 8860-50, Instruction Manual

Page: 286 / 490

11.3 Saving Data
274
To divide waveform data for saving: Divided Save
(valid only for saving in binary format)
When the file size is likely to be large such as when the recording length is long,
dividing the data into multiple files can facilitate later searching through wave-
forms.
The data is divided and saved after each specified recording length. The record-
ing length for saving by Auto Save or by the SAVE key is set by the [Division] item
on the Settings screen.
See "11.3.7 Automatically Saving Waveforms" (p. 282),
"11.3.8 Optionally Selecting Waveforms & Saving (SAVE Key)" (p. 285)
When using Divided Save, a new directory is created for the waveform data and
index file (IDX). The index file enables batch loading of the data. (p. 295)
When manual saving with Memory Division enabled, and the [Target Blocks] set-
ting is [All Blocks], Divided Save is not available.
To save selected memory blocks from a recorded waveform
(only when manual saving using Memory Division)
When the Memory Division function (p. 109) is enabled and waveforms are
recorded to individual blocks, you can select whether to save only displayed
blocks or all used blocks.
See "11.3.8 Optionally Selecting Waveforms & Saving (SAVE Key)" (p. 285)