Hioki 8860-50, Instruction Manual

Page: 198 / 490

7.3 Displaying Logic Waveforms
186
Display Position Setting Example when Recording Mixed Analog and Logic
Waveforms
The display height of logic waveforms can be modified.
Viewing is improved by setting a narrow display height when many waveforms
are displayed.
Numbering changes when changing the display position
If a duplicate position number is accepted for a channel, or if another screen is
displayed without accepting assignments, the position number of the duplicated
channel is automatically changed.
• When priority is given to the position number of the changed channel
Place the cursor on the position number of the channel to be given priority, and
select
[Set] . The other (duplicated) channel is assigned the next available
higher number.
• When the position number is duplicated and another screen is displayed with-
out selecting [Set] , or when [Set] is selected while the cursor is placed on a
non-duplicated channel.
The duplicated position number is reassigned the next available higher (L Ch
A) number.
[Normal] Case
7.3.3 Setting the Display Height
Logic Waveform Display Height
To open the screen: Press the
SET
key

Select with the
SUB MENU
keys

Sheet Settings screen
Operating Key Procedure
1
SHEET/PAGE Select the [Logic] page.
2
CURSOR Move the cursor to the [Height] item.
3
F1 to F8 Set the display height of the waveforms.
Wide
Wide display height.
Normal
Normal display height. (default setting)
Narrow
Narrow display height.
Wide Normal Narrow