Furuno FCR-2107 series Operator'S Manual Download Page 485

Page: 485 / 556

Appendix 4: C-MAP CM-93/3 Charts

AP-33

A4.3.4 Chart catalogue of C-MAP charts

You can use the chart catalogue to graphically view content of loaded C-MAP database(s) into ECDIS.

Open the Chart menu and select Catalogue.

Select "Source of Chart Catalogue" as C-MAP. Use Navigation purpose selection to view desired charts.

Charts for which you possess a valid license are marked in green. Charts for which you have no license or the

license has expired are shown as red borderlines.

1. Source of Chart Catalogue

CD ROM:

Display charts available in a named "CD ROM".

RENC:

Display charts available from an RENC.

SENC:

Display charts stored in your hard disk in SENC format.

C-MAP

: Display charts of CM93 ed. 3 chart database stored on ECDIS.

2. View Filters

Name:

Display also cell names in graphical coverage display.

Permit:

Display only charts for which you have permit.

RENC Cancelled Charts:

Display charts that are cancelled in an RENC.

Group

: Display charts that are member of selected group.

Navigation purpose:

Display charts for chosen navigation purpose (overview, general, coastal, approach,

harbour, berthing).

3. Selected Chart

Cell:

Name of the chart

Open:

Opens selected chart to ECDIS display.

The

chart limit boxes

are color-coded as follows:

Green

You can view chart on ECDIS.

Red

You cannot view chart on ECDIS, because license is missing or license has expired for the chart.

Summary of Contents for FCR-2107 series













































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FCR-2107 series

Reviews:

Related manuals for FCR-2107 series

Brands by name

Popular brands

Furuno FCR-2107 series, Operator'S Manual

Search results

Summary of Contents for FCR-2107 series

Reviews:

Related manuals for FCR-2107 series

Brands by name

Popular brands