Furuno FCR-2107 series, Operator'S Manual

Page: 310 / 556

10. Route Planning
10-12
Entering latitude and longitude in position field
1. Place the cursor on Route in the status bar, click the Plan button to open the Plan Route dialog box then click
the WPT tab.
2. Check Enable changes, then choose desired WPT.
3. Place the cursor in the Lat or Lon field as appropriate, spin the scrollwheel to set co-ordinates then push the
scrollwheel to confirm.
Entering distance and direction for next waypoint
Position of WPT can be defined using distance and direction between two waypoints.
1. Place the cursor on Route in the status bar, click Plan to open the Plan Route dialog box then click the WPT tab.
2. Check Enable changes, then highlight number of WPT by cursor then push the left button.
3. Click the Next WPT button, and the following dialog box appears.
INSERT/MODIFY NEXT WPT
Current WPT: 1
Next WPT
NM
OK
4. Enter Direction and Distance in respective box in the Next WPT field then click the OK button.