Furuno FCR-2107 series, Operator'S Manual

Page: 313 / 556

10. Route Planning
10-15
10.4.6 Deleting a waypoint
To delete a waypoint, do the following:
1. Place the cursor on Route in the status bar then click the Plan button to open the Plan Route dialog box. Click
the WPT tab to open the WPT page. Check Enable changes.
2. Highlight WPT number on WPT list which you wish to delete.
3. Click the Delete WPT button.
10.4.7 Importing waypoint from other routes
You are able to choose waypoints from other routes to import them to current route. To import waypoints do the
following:
1. Place the cursor on Route in the status bar then click Plan to open the Plan Route dialog box. Click the WPT tab
to open the WPT page. Check Enable changes.
2. Click the Import button. The following dialog box appears.
WPT IMPORT
WPT total
First WPT to copy
Number of WPTs
WPT total
Copy after WPT
Copy before WPT
3. In the Copy from window, place the cursor in the Route box, spin the scrollwheel to choose the route from
which to copy waypoints then push the scrollwheel.
4. Enter first waypoint to copy in "First WPT to copy". Spin the scrollwheel to choose WPT number then push the
scrollwheel.
5. Enter number of waypoints to copy in "Number of WPTs". Spin the scrollwheel to choose desired number then
push the scrollwheel.
6. Enter where to import waypoints. To enter them after a WPT in a route, enter waypoint number in the "Copy
after WPT" box. If you want to enter them before a WPT in the route where WPTs will be imported, enter
waypoint number in the "Copy before WPT" box.
Spin the scrollwheel to choose desired number then push the scrollwheel.
7. Choose copying order, Direct or Reverse. "Direct" copies the waypoints in their original order; "Reverse"
copies them in reverse order. Spin the scrollwheel to choose desired option then push the scrollwheel.
8. Click the Copy button.
9. When finished, click X at top right corner of the dialog box to close the dialog box.