Furuno FCR-2107 series, Operator'S Manual

Page: 301 / 556

10. Route Planning
10-3
Exchange with Monitored:
This function exchanges planned and monitored routes. Planned route is used both as alternative route and as an
editable route.
NOTICE: Before using this function, set the next TO WPT on the Prepare page of the Plan dialog box. If this is not
done, and unintended waypoint could become the TO WPT. If this occurs, right-click the TO WPT then enter
correct WPT.
Copy from Monitored:
Copy monitored route to plan route.
Backup and Restore:
You can make a backup of a route to a floppy disk or restore a route from a floppy disk. See Chapter 14 Backup
Operations.
Report:
Generate report of planned route.
Full WPT Report:
Generate detailed report of planned route.
Passage Plan Report:
Generate a combined report from active planned route and active Notes.
Note: To display a planned route, make sure that desired options of the planned route (Center line, Channel borders,
WPT marks, Leg marks, etc.) are chosen to either Std or Other on the Route page in the Chart Display dialog box.
Mode
LAT
LON RAD/NM CH LIM/m MIN/kn MAX/kn
Delete WPT
WPT
WPT
WPT count
Alerts