12. User Chart Control
12-3
Opening the user chart dialog box and menu
•
Place the cursor on UChart on the status bar. Click either
Plan
or
Monitor
button to open corresponding dialog
box. If no UChart has been chosen, one of the menus shown below appears, along with appropriate dialog box.
•
Use the menu to choose user chart.
If you want to make further selection from a menu and only the dialog box is shown, you can show the menu on the
display by clicking the
Plan
or
Monitor
button again, or place the cursor on the triangle in the dialog box.
[User Chart]
Go Monitor mode
Select
Unselect
Create
Backup and Restore
Combine
Point report
Line report
Area report
Symbols report
Tidal report
Full report
Report for radar
Close
[User Chart]
Go Plan mode
Select
Unselect
Backup and Restore
Point report
Line report
Area report
Symbols report
Full report
Report for radar
Close
Go Monitor(or Plan) mode:
The user can switch user chart mode between plan and monitoring modes
with Go Monitor(Plan) mode on the menu. Push the scrollwheel to show
the sub menu shown below.
•
Go Monitor mode>Go Monitor mode:
Switch from plan mode
to monitor mode.
•
Go Monitor mode>Move Mon. to Plan mode:
Switch user
chart currently used in plan mode to monitor mode.
•
Go Plan mode>Go Plan mode:
Switch from monitor mode to
plan mode..
•
Go Plan mode>Move Plan to Mon. mode:
Switch user chart
currently used in monitor mode to plan mode.
Select:
User can specify user chart to use.
Unselect:
Remove current user chart from active use.
Create:
User can create a new user chart.
Backup and Restore:
User can make backup copy of user chart or restore user chart from
backup device.
Combine:
User can combine two or more user charts together.
Point report:
Generates report about points in a user chart.
Line report:
Generates report about lines in a user chart.
Area report:
Generates report about area objects in a user chart.
Symbols report:
Generates report about symbols in a user chart.
Tidal report:
Generates report about tides in a user chart.
Full report:
Generates report about all the objects in a user chart.
Report for radar:
Generates report about all the objects in a user chart which is displayed on the radar screen.
Summary of Contents for FCR-2107 series
