Furuno FCR-2107 series, Operator'S Manual

Page: 312 / 556

10. Route Planning
10-14
To add a new waypoint by the Next WPT button, do the following:
1. Place the cursor on Route in the status bar then click the Plan button to open the Plan Route dialog box. Click
the WPT tab to open the WPT page. Check Enable changes.
2. Choose last waypoint.
3. Click the Adjust after button in the Waypoints page. Enter direction and distance for waypoint then click the
OK button.
INSERT/MODIFY NEXT WPT
Current WPT: 1
Next WPT
NM
OK
10.4.5 Inserting a waypoint
If you want to insert a waypoint between two waypoints, use the Insert before button, on the WPT page. This
inserts a waypoint next to current waypoint. For example, you want insert a new waypoint between waypoints 6 and
7. Choose WPT 7 then click the
Insert before button. The new waypoint will be inserted between WPT 6 and WPT
7. WPT is highlighted on WPT list.