Furuno FCR-2107 series Operator'S Manual Download Page 332

Page: 332 / 556

11. Route Monitoring

11-10

11.9 Route

Monitoring

Alerts

The following alerts are related to route monitoring.

352 Route: Illegal ETA WPT:

Appears when the system cannot use the chosen ETA waypoint. The reason might

be corrupted or missing route file.

353 Route: Illegal To WPT:

Appears when the system cannot use the chosen "To WPT". The reason might be

corrupted or missing route file.

354 Route: Illegal final WPT:

Appears when the system cannot use the chosen final waypoint. The reason might

be corrupted or missing route file.

360 Route: WPT change disabled:

Appears when you try to change next or final waypoint while the system is in

automatic route steering. Leave automatic route steering and change the waypoint.

363 Route: Choose disabled:

Appears when the you try to choose a new route for route monitoring while the

system is in automatic route steering. Leave automatic route steering and choose a new route.

364 Route: Cancel disabled:

Appears when you try to cancel current monitored route while the system is in

automatic route steering. Leave automatic route steering and cancel the current route.

454 Route: End reached:

Appears when own ship passes the last waypoint. The system cancels current route

monitoring. Normally this alert only appears if alert 458 is left unacknowledged.

457 Route: Outside chl limits alert:

Appears if own ship is outside the monitored channel.

The following alerts are related to route monitoring when automatic route steering is not used:

451 Route: WPT approach alert:

Appears when own ship is "x" minutes of the wheel over point of the next

waypoint, "x" being the time specified.

458 Route: Last WPT approach alert:

Appears when own ship arrives "x" minutes from the last waypoint, "x"

being the time specified. Acknowledgement of this alert cancels current route monitoring.

Summary of Contents for FCR-2107 series













































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FCR-2107 series

Reviews:

Related manuals for FCR-2107 series

Brands by name

Popular brands

Furuno FCR-2107 series, Operator'S Manual

Search results

Summary of Contents for FCR-2107 series

Reviews:

Related manuals for FCR-2107 series

Brands by name

Popular brands