Furuno FCR-2107 series Operator'S Manual Download Page 47

Page: 47 / 556

2. Radar Operation

2-5

2.4 Presentation

Modes

2.4.1 Presentation

modes

This radar has the following presentation modes in the radar mode:

Relative Motion (RM)

Head-up: Unstabilized

Head-up TB: Head-up with compass-stabilized bearing scale (True Bearing) where the bearing scale rotates with the
compass reading.

Course-up: Compass-stabilized relative to ship’s orientation at the time of selecting course-up.

North-up: Compass-stabilized with reference to North.

True Motion (TM)

North-up: Ground or sea stabilized with compass and speed inputs.

Choosing presentation mode by keyboard

Push the

MODE

key consecutively to select radar presentation mode desired. The PRESENTATION MODE box

shows the current presentation mode.

Choosing presentation mode by trackball

1. Use the trackball to select the PRESENTATION MODE box at the top left corner of the screen.

2. Push the left button to select mode desired.

Loss of gyrocompass signal

When the compass signal is lost, alert

"705: Gyro error"

or "

706: Gyro error

" appears. After timeout, the

alert "

402: No heading available

" appears, the presentation mode automatically becomes head-up, and all TT

and AIS targets are erased. Check the gyro and select the presentation mode with the

MODE

key or the

PRESENTATION MODE box.

Summary of Contents for FCR-2107 series













































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FCR-2107 series

Reviews:

Related manuals for FCR-2107 series

Brands by name

Popular brands

Furuno FCR-2107 series, Operator'S Manual

Search results

Summary of Contents for FCR-2107 series

Reviews:

Related manuals for FCR-2107 series

Brands by name

Popular brands