Furuno FCR-2107 series, Operator'S Manual

Page: 547 / 556

FURUNO
SP - 3
E3559S01B-M
3. ECDIS
3.1 Display contents
Chart materials IHO/IMO S57 edition-3 ENC vectorized material
Own ship display Own ship mark and numeral indication or lat/lon, speed and
course
Other ship display ARPA target mark and numerical data
(range and bearing from own ship, course, speed, CPA,
TCPA)
Other data Route, waypoint, nav line, electronic chart, various alarms
3.2 Other display features Chart zoom in and zoom out
Cursor EBL, VRM, parallel cursor
One-touch restore One-touch restore of standard mode
Chart data Select to show applicable data
3.3 User interface
Position fixing - Navigation by position from external EPFS
- Dead reckoning by gyro, log
- Kalman filter determines best position from gyro data and
EPFS
Navigation planning - Planning by Rhumb line, Great circle
- Route creation
- Route data may be transferred to radar
- Route data may be transferred from ECDIS
Route monitoring - Off-track display
- Waypoint arrival alarm
- Shallow depth alarm
User chart User chart creation (Max. 2000 lines, 1000 symbols), with
overlay
MOB (Man Overboard): Position, etc. at time of man overboard are recorded and MOB
mark is displayed on the screen.
4. I/O
4.1 Heading data Built-in interface (option) for sync signal (20-135 VAC, 50-400
Hz), or stepper signal (20-100 VDC), any polarity, for
gyrocompass, GPS compass SC-60/120 by IEC 61162-2
4.2 Speed signal IEC 61162-1
4.3 AIS interface IEC 61162-1, ABM, BDM, etc.
4.4 Input sentences BWC, BWR, DBS, DBT, DPT, DTM, GGA, GLL, HDT, RMA,
RMB, RMC, RTE, VBW, VDR, VHW, VWR, VTG, VWT, MTW,
MWV, WPL, ZDA (IEC 61162-1)
4.5 Output sentences TLL, RSD, TTM, AAM (IEC 61162-1)