Furuno FCR-2107 series Operator'S Manual Download Page 90

Page: 90 / 556

2. Radar Operation

2-48

2.35.1 Selecting pre defined chart database display settings

To select desired IMO Chart Display Settings, proceed as follows:

1. Open the Chart Display dialog and move cursor over black triangle on

Chart Display dialog then push the left mouse button.

2. Choose

Set IMO Base, Set IMO Primary, Set IMO Standard or Set

IMO All Other

from the menu.

2.35.2 Creating user-defined chart database display settings

See section 7.9.6 Storing and recalling chart display setting for visible chart and navigation features.

Note 1:

We recommend that you create separate chart databases for "easy viewing of radar in chart radar mode" and

"view chart details in ECDIS mode".

Note 2:

Save chart radar mode settings and ECDIS mode settings together when creating a user-defined chart

database.

Note 3:

The chart database display settings that can be saved or selected are in the Standard, Other and Other 2

pages of the Chart Display dialog.

Note 4:

The items on the Chart page of the Chart Display dialog are common to both the chart radar and ECDIS

modes. However, the items cannot be saved or selected (on the Chart Display menu).

Summary of Contents for FCR-2107 series













































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FCR-2107 series

Reviews:

Related manuals for FCR-2107 series

Brands by name

Popular brands

Furuno FCR-2107 series, Operator'S Manual

Search results

Summary of Contents for FCR-2107 series

Reviews:

Related manuals for FCR-2107 series

Brands by name

Popular brands