Fuji Xerox DocuPrint 5105 d, User Manual

Page: 105 / 419

3.12 Printing Using E-mail - Mail Print -
105
Services >
E-mail >
Defaults >
From
Address > Edit Receiving
Protocol Specify the e-mail receiving
protocol. • SMTP
• POP3*
{
-
Incoming Mail
Print Options Configure this setting when
printing the e-mail header
and message along with the
document attached to
received e-mail. Specify
[Attachment, Full Headers &
Message] to print the receive
routing of the e-mail, etc. • Print
Attachment
Only
• Print
Attachment &
Message if it
exists
• Attachment,
Basic Headers
& Message*
• Attachment,
Full Headers
& Message
{ {
Print Delivery
Confirmation E-
mail Specify whether or not
delivery receipt e-mail
should be printed. • Off*
• On
• Print when
delivery fails
{ {
Connectivity >
Protocols >
POP3 Setup IP Address /
Host Name &
Port Specify the IP address of the
POP3 server for receiving e-
mail, the IPv6-addr format,
or FQDN (Fully Qualified
Domain Name).
Specify the port number
used by the POP3 server. Alphanumeric
characters plus
period (.) and
hyphen (-); up to
128 bytes
1 ~ 65535
-
{
POP Receive
Password
Encryption Select the [APOP
Authentication] check box to
use APOP for POP receive
verification. • Cleared:
Disabled*
• Selected:
Enabled
-
{
Login Name Set the login user name for the
POP3 server. Only one user can
be specified. ASCII graphic
characters (codes
33 to 126); up to
64 bytes
-
{
Password Specify the password for the
POP user name, and re-enter
the same password into
[Retype Password]. ASCII printable
characters
(ASCII graphic
characters plus
space; codes 32
to 126); up to
64 bytes
- -
Polling Interval Specify the interval for
polling the POP3 server for
mail. 1 to 120
minutes
10 minutes*
-
{
Item Setting Description Available
Settings
Receiving Protocol
SMTP POP3