Franklin Electric CERUS X-DRIVE CXD-003A-4V, Installation And Operation Manual

Page: 224 / 252

PARAMETER REFERENCE TABLES
Parameter Descriptions > COMM Menu
224
Comm-06 1286 N Main Frequency 0.00 to 599.00 Hz When Auto Speed Ref [SET-07] is set to 5_RS485 Interface , the last frequency
command is stored in this parameter. After rebooting from an abnormal
turn-off or momentary power loss, the VFD will continue operation with
last frequency. (Read Only)
Comm-07 1287 Y Block Transf 1 0000h to FFFFh Block transfer allows selection of a group of parameters for transfer
through communication code 03H.
Comm-08 1288 Y Block Transf 2 0000h to FFFFh See [Comm-07]
Comm-09 1289 Y Block Transf 3 0000h to FFFFh See [Comm-07]
Comm-10 1290 Y Block Transf 4 0000h to FFFFh See [Comm-07]
Comm-11 1291 Y Block Transf 5 0000h to FFFFh See [Comm-07]
Comm-12 1292 Y Block Transf 6 0000h to FFFFh See [Comm-07]
Comm-13 1293 Y Block Transf 7 0000h to FFFFh See [Comm-07]
Comm-14 1294 Y Block Transf 8 0000h to FFFFh See [Comm-07]
Comm-15 1295 Y Block Transf 9 0000h to FFFFh See [Comm-07]
Comm-16 1296 Y Block Transf 10 0000h to FFFFh See [Comm-07]
Comm-17 1297 Y Block Transf 11 0000h to FFFFh See [Comm-07]
Comm-18 1298 Y Block Transf 12 0000h to FFFFh See [Comm-07]
Comm-19 1299 Y Block Transf 13 0000h to FFFFh See [Comm-07]
Comm-20 1300 Y Block Transf 14 0000h to FFFFh See [Comm-07]
Comm-21 1301 Y Block Transf 15 0000h to FFFFh See [Comm-07]
Comm-22 1302 Y Block Transf 16 0000h to FFFFh See [Comm-07]
Comm-23 1303 N Com Decoding 0_20xx
1_60xx
Select address starting range for communication via RS485 and Communi -
cation Card.
Comm-24 1304 N BACnet MAC ID 0 to 127 BACnet address of VFD.
Comm-25 1305 N BACnet Speed 9.6 to 76.8 Kbps BACnet baud rate.
Comm-26 1306 N Device ID Lo 0 to 65535 BACnet Device ID Low.
Comm-27 1307 N Device ID Hi 0 to 63 BACnet Device ID High.
Comm-28 1308 N Max Address 0 to 127 BACnet max address.
Comm-29 1309 N Password 0 to 65535 BACnet password.
Comm-30 1310 N Com Card ID 0_No Com Card
1_DevNet Slave
2_P-bus DP Slave
3_CANopen S/M
4_Mbus-TCP Slave
5_E-Net/IP Slave
13_FELE BT Card
Identification of installed communication card. (Read Only)
Comm-31 1311 N Com Card FW 0 to 65535 Firmware version of communication card. (Read Only)
Comm-32 1312 N Product code 0 to 65535 Part number of communication card. (Read Only)
Comm-33 1313 N Error code 0 to 65535 Error status of communication card. (Read Only)
Comm-34 1314 Y D-Net Card Addr (Variable) DeviceNet or address of VFD.
Comm-35 1315 Y D-Net Speed 0_125 Kbps
1_250 Kbps
2_500 Kbps
3_1 Mbps
DeviceNet baud rate.
Comm-36 1316 Y D-Net Type 0_Standard
1_Special
0_Standard: DeviceNet Standard is when D-Net Speed [Comm-35] is set to
125Kbps, 250Kbps, and 500Kbps in standard speeds.
1_Special: DeviceNet Special is for other speeds similar to CANopen.
Comm-37 1317 Y M-bus IP Type 0_Static IP
1_DHCP
Set the Modbus TCP IP manually with Static IP or automatically by host
control with DHCP.
Comm-38 1318 Y IP Address 1 0 to 65535 First (most significant) octet of IP address. (0-255)
XXX.---.---.---
Comm-39 1319 Y IP Address 2 0 to 65535 Second octet of IP address. (0-255)
---.XXX.---.---
Comm-40 1320 Y IP Address 3 0 to 65535 Third octet of IP address. (0-255)
---.---.XXX.---
Comm-41 1321 Y IP Address 4 0 to 65535 Fourth (least significant) octet of IP address. (0-255)
---.---.---.XXX
CODE
Mod
Bus AR Display Name
Range Description