Franklin Electric CERUS X-DRIVE CXD-003A-4V, Installation And Operation Manual, Page: 168 / 252

MAINTENANCE
Troubleshooting
168
CIdn
(40)
CAN/S Idx exceed
CANopen Index error
Action and Reset
Action condition CANopen communication Index error
Action time Immediately displays when the fault is detected
Reset method Manually
Reset condition Upper unit sends a reset package to clear this fault
Recorded When [SET-08] does not equal 3, CIdn is a warning and isn’t recorded.
Possible Causes Corrective Action
• Incorrect setting of CANopen index • Reset CANopen Index ( [ADV-03] = 7)
Warning Display Description
CPL0 (91)
Copy PLC Mode Rd
CPL1 (92)
Copy PLC Mode Wt
Copy PLC Read mode error
Copy PLC write mode error
Action and Reset
Action condition When copy PLC read mode with incorrect process
Action time Immediately
Reset method Manually
Reset condition Directly resets
Recorded N/A
Possible Causes Corrective Action
• When copy PLC mode and the process is
incorrect
• Cycle the power and copy PLC mode again
Warning Display Description
CPLF
(95)
Copy PLC Func
KPC-CC01 Copy PLC function should be executed when PLC is off
Action and Reset
Action condition Software detection
Action time Immediately
Reset method Manually
Reset condition Directly resets
Recorded N/A
Possible Causes Corrective Action
• PLC function is enabled when KPC-CC01
is running copy PLC
• Disable PLC function first, then run the PLC copy function again
Warning Display Description
CPLP (90)
Copy PLC Pass Wd
Copy PLC password error.
Action and Reset
Action condition PLC password is incorrect
Action time Immediately
Reset method Manually
Reset condition Directly resets
Recorded N/A
Possible Causes Corrective Action
• PLC password is incorrect • Reset and enter correct PLC password
Warning Display Description