Franklin Electric CERUS X-DRIVE CXD-003A-4V, Installation And Operation Manual, Page: 199 / 252

MAINTENANCE
Fan Replacement
199
Frame G Heat Sink Fan
1. Remove four screws and remove the lower cover. When replacing screws, tighten to a torque of 10.4 to
13 in-lbs (1.18 to 1.47 Nm).
2. Remove eight screws from the top cover. When replacing screws, tighten to a torque of 30 to 34.5 in-
lbs (3.4 to 3.9 Nm).
3. Remove two screws from the bottom of the upper front cover. When replacing screws, tighten to a
torque of 12 to 14 in-lbs (1.37 to 1.57 Nm).
4. Remove upper front cover.
5. Release clip and disconnect fan power connector.
6. Remove three screws from fan. When replacing the screws, tighten to a torque of 12 to 14 in-lbs (1.37 to
1.57 Nm).
7. Remove protective covers and pull out the fan by placing fingers through the lifting holes.
4
1
9
10
2
3
5
6