Franklin Electric CERUS X-DRIVE CXD-003A-4V, Installation And Operation Manual

Page: 225 / 252

PARAMETER REFERENCE TABLES
Parameter Descriptions > COMM Menu
225
Comm-42 1322 Y Address Mask 1 0 to 65535 First (most significant) octet of Mask address. (0-255)
XXX.---.---.---
Comm-43 1323 Y Address Mask 2 0 to 65535 Second octet of Mask address. (0-255)
---.XXX.---.---
Comm-44 1324 Y Address Mask 3 0 to 65535 Third octet of Mask address. (0-255)
Comm-45 1325 Y Address Mask 4 0 to 65535 Fourth (least significant) octet of Mask address. (0-255)
---.---.---.XXX
Comm-46 1326 Y G-way Address 1 0 to 65535 First (most significant) octet of Gateway address. (0-255)
XXX.---.---.---
Comm-47 1327 Y G-way Address 2 0 to 65535 Second octet of Gateway address. (0-255)
Comm-48 1328 Y G-way Address 3 0 to 65535 Third octet of Gateway address. (0-255)
Comm-49 1329 Y G-way Address 4 0 to 65535 Fourth (least significant) octet of Gateway address. (0-255)
Comm-50 1330 Y MBus TCP Pass L 0 to 99 Communication card password for Modbus TCP (Low word)
Comm-51 1331 Y MBus TCP Pass H 0 to 99 Communication card password for Modbus TCP (High word)
Comm-52 1332 Y MBus Card Reset 0_Disable
1_Reset
Sets the communication card to default values for Modbus TCP.
Comm-53 1333 Y MBus TCP Config 0 to 65535 Once IP address parameters are set, then set Modbus TCP Config [Comm-53] to
1: Internet Parameters to load parameters. Once login password is set, then set
Modbus TCP Config to 2: Login Password to load password.
Comm-54 1334 N MBus TCP Status 0 to 65535 When the communication card is set with a password, this bit is enabled,
When the password is cleared, this bit is disabled.
Comm-55 1335 N SET Comm Card 0 to 65535 Enables an optional Ethernet/IP card, which disables Bluetooth. Set bit 1 to
ON to enable the Ethernet card. Set to OFF to disable the card and allow
Bluetooth.
CODE
Mod
Bus AR Display Name
Range Description