Franklin Electric CERUS X-DRIVE CXD-003A-4V, Installation And Operation Manual

Page: 174 / 252

MAINTENANCE
Troubleshooting
174
ECio
(77)
ExCom IONet brk
IO connection break off
Action and Reset
Action condition IO connection between the communication card and the master is broken off
Action time Immediately
Reset method Manually
Reset condition Immediately
Recorded N/A
Possible Causes Corrective Action
• The cable is loose
• Incorrect parameter setting for master
communication
• Re-install the cable
• Check the setting for master communication parameter
Warning Display Description
ECiP (86)
ExCom IP fail
IP setting error
Action and Reset
Action condition Software detection
Action time Immediately
Reset method Manually
Reset condition Immediately
Recorded N/A
Possible Causes Corrective Action
• IP conflict
• DHCP IP configuration error • Reset IP
• MIS check if DHCP Server works normally
Warning Display Description
ECLv
(71)
ExCom pwr loss
Low voltage of communication card
Action and Reset
Action condition The 5V power that drive provides to communication card is to low
Action time Immediately
Reset method Re-power
Reset condition N/A
Recorded N/A
Possible Causes Corrective Action
• The card is loose
• The 5V power that drive provides to
communication card is to low
• Make sure the communication card is well inserted.
• If 5v power is too low:
• Switch the communication card to other X-Drives and observe if there is ECLv warning shown.
If yes, replace with a new communication card; if not, replace the drive.
• Use another communication card to test if the ECLv warning has shown as well. If not, replace
the card; if yes, replace the drive.
Warning Display Description