Franklin Electric CERUS X-DRIVE CXD-003A-4V, Installation And Operation Manual

Page: 210 / 252

PARAMETER REFERENCE TABLES
Parameter Descriptions > I/O Menu
210
IO-06 0518 Y AVI1 Loss Trip 0_Disable
1_Hold Speed
2_Stop/Start
3_Trip Stop
4_At AI Loss Freq
Selects operation when AVI1 signal is lost.
1_VFD runs at previous speed (2 sec before signal loss)
2_VFD will restart when signal is restored
3_VFD will stay tripped until reset
4_VFD runs at frequency set in [IO-76]
IO-07 0519 Y AVI1 Loss Lvl 0_Below Minimum
1_Below 0.5xMin
2_Redundant
Selects level for determining AVI1 signal loss.
IO-08 0520 Y AVI1 Loss Delay 0 to 3600 sec Duration the AVI1 signal is in a loss condition before initiating an AVI1 Loss
Trip operation.
IO-09 0521 Y AVI1 Filter T 0.00 - 20.00 sec AVI1 time filter for noisy analog signal. The delay time helps buffer interfer -
ence that could cause error in the signal input. Longer times improve signal
confirmation, but the response time is delayed.
IO-10 0522 Y AVI2 Filter T 0.00 - 20.00 sec AVI2 time filter for noisy analog signal. The delay time helps buffer interfer -
ence that could cause error in the signal input. Longer times improve signal
confirmation, but the response time is delayed.
IO-11 0523 N Spare Max Value 0 to 60000 Maximum range of spare transducer
IO-12 0524 N Spare AI Select 0_AVI1
1_ACI
2_AVI2
Analog input for spare transducer
IO-13 0525 Y F/B PT Status 0_Main PT On
1_Spare PT On
F/B PT Status is Feedback Pressure Transducer Status.
0_Main pressure transducer provides feedback reading
1_Spare pressure transducer is providing feedback reading
IO-14 0526 Y PID Filter Time 0.1 to 300.0 sec PID feedback signal time filter for noisy analog signal. The delay time helps
buffer interference that could cause error in the signal input. Longer times
improve signal confirmation, but the response time is delayed.
IO-15 0527 Y PID Delay Time 0.0 - 35.0 sec Time delay for frequency command.
IO-16 0528 Y Limit by Level 0_Disable
1_Enable
When enabled, VFD will monitor analog input set as Auto mode speed ref -
erence or PID F/B source and it will decrease High Frequency Limit value.
IO-17 0529 Y Max Limit Level 0.0 to 20.0 mA Sets Aux Analog input maximum value (in Aux Input units) corresponding
to VFD or PID High Frequency limit.
IO-18 0530 Y Min Limit Level 0.0 to 20.0 mA Sets Minimum value of Aux Analog input corresponding to
Min Freq Limit [IO-19] .
IO-19 0531 Y Min Freq Limit 0.0 to High Freq Limit [SET–14]
for V/F control
0.0 to PID Hi Hz limit [SET–23] for
PID control
Sets Minimum value for High Frequency Limiting range corresponding to
Min Limit Level [IO-18] signal level.
IO-20 0532 Y DI Filter 0.000 to 30.000 sec Response time of digital input terminals ( MI1 ~ MI8 ). The delay time helps buf -
fer interference that could cause error in the signal input. Longer times
improve signal confirmation, but the response time is delayed.
CODE Mod
Bus AR Display Name
Range Description