Franklin Electric CERUS X-DRIVE CXD-003A-4V, Installation And Operation Manual

Page: 83 / 252

OPERATION
Control Options
83
Set the following parameters to activate programs:
Program 1 Parameters:
Program 1 Setting [ADV-56]: This setting selects the type of event Program 1 will activate, including:
• 0_None : Scheduling program 1 is disabled.
•
1_VFD Run
: Provides Enable/Disable status to VFD run command. If any Program is set to
1_VFD Run
and there is a Run Command in Auto Mode, the VFD will start only when the program reaches On
Time [
ADV-57]
and will stop when it reaches OFF time
[ADV-58]
. If the HOA is changed to OFF or run
command is removed during a scheduled run, the VFD will stop.
•
2_Step Freq 1
: VFD will run motor with preset speed (step frequency 1), selected in
[VFD-04]
when
running in Auto mode without PID control.
•
3_Step Freq 2
: VFD will run motor with preset speed (step frequency 2), selected in
[VFD-05]
when
running in Auto mode without PID control.
•
4_Step Freq 3
: VFD will run motor with preset speed (step frequency 3), selected in
[VFD-06]
when
running in Auto mode without PID control.
•
5_S-Point-A
: VFD will change PID reference to
S-Point-A [ADV–74]
when in Auto mode with PID con -
trol.
•
6_S-Point-B
: VFD will change motor control to
S-Point-B [ADV–75]
when in Auto mode with PID con -
trol.
•
7_S-Point-AB
: VFD will change motor control to
S-point-AB [ADV–76]
when in Auto mode with PID con -
trol.
Program 1 On Time [ADV-57]: Selects when Program 1 event will be activated. Range = 00:01 to 24:00.
Program 1 Off Time [ADV-58]: Selects when the selected Program event will be deactivated.
NOTE: If both on time [ADV-57] and off time [ADV-58] are set to identical values, the program is disabled.
Program 1 Week Day(s) [ADV-59]: Selects which days of the week the Program will be effective. For exam -
ple, for 5 working days of the week, set to
_MTWTF_
and for weekends set to
S_____S
.
Program 2 Parameters:
Program 2 Setting [ADV-60]: Selects the type of event Program 2 will activate. It has the same selections
as Program 1 Setting [ADV-56] .
Program 2 On Time [ADV-61]: Selects when Program 2 event will be activated. 00:01 setting disables this
step.
Program 2 Off Time [ADV-62]: Selects when Program 2 event will be deactivated.
Program 2 Week Day(s) [ADV-63]: Selects which days of the week Program 2 will be effective.
NOTE:
To schedule an event to start one day and stop on another day, use two Programs. The 1
P
st
P
Program
ON time should be set to the desired start time and OFF time to 0:01 (inactive OFF event). The 2
P
nd
P
Program
ON time is set to 0:01 (inactive ON event) and OFF time is set to desired stop time.
Program 3 Parameters:
Program 3 Setting [ADV-64]: Program 3 event type. It has the same selections as Program 1 Setting [ADV-56] .
Program 3 On Time [ADV-65]:
Selects when Program 3 event will be activated. 00:01 setting disables this
step.
Program 3 Off Time [ADV-66]:
Selects when Program 3 event will be deactivated.
Program 3 Week Day(s) [ADV-67]: This setting selects which days of the week Program 3 will be effective.
Program 4 Parameters:
Program 4 Setting [ADV-68]: Program 4 event type. It has the same selections as Program 1 Setting [ADV-56] .
Program 4 On Time [ADV-69]:
Selects when Program 4 event will be activated. 00:01 setting disables this
step.
Program 4 Off Time [ADV-70]:
Selects when Program 4 event will be deactivated.
Program 4 Week Day(s) [ADV-71]: Selects which days of the week Program 4 will be effective.