Franklin Electric CERUS X-DRIVE CXD-003A-4V, Installation And Operation Manual

Page: 172 / 252

MAINTENANCE
Troubleshooting
172
ECbY
(88)
ExCom Busy
Communication card busy: too much packets are received
Action and Reset
Action condition Software detction
Action time N/A
Reset method Manually
Reset condition N/A
Recorded N/A
Possible Causes Corrective Action
• Communication packets are too much
for the communication card to process
• Reduce communication packets.
Warning Display Description
ECCb (89)
ExCom Card break
Communication card break off warning
Action and Reset
Action condition Communication card break off
Action time The time between communication card break off and ECCb displays:
1. EtherNet/IP: 3 sec.
2. Modbus TCP: 3 sec.
3. DeviceNet: 1 sec.
4. PROFIBUS: 1 sec.
5. EtherCAT: 0.1 sec.
Reset method Automatically
Reset condition After communication card is re-installed
Recorded N/A
Possible Causes Corrective Action
Warning Display Description
ECCFF
(75)
ExCom Facty def
Factory default setting error
Action and Reset
Action condition Factory default setting error
Action time Immediately
Reset method Cycle the power
Reset condition N/A
Recorded N/A
Possible Causes Corrective Action
• Factory default setting error • Use DCISoft to reset to the default value.
Warning Display Description
ECCS (82)
ExCom Inr CRC
Checksum error for communication card and the drive
Action and Reset
Action condition Software detection
Action time N/A
Reset method Manually
Reset condition Immediately
Recorded N/A
Possible Causes Corrective Action
• Noise interference • Verify wiring of the control circuit, and wiring/grounding of the main circuit to prevent interference.
Warning Display Description