Foma N902iX, Manual

Page: 77 / 574

75
Continued on next page
Making/Receiving Phone Calls
<Rec
or
d me
ssag
e
>
ME
NU
5
5
Having a FOMA terminal read out the current time <Voice clock>
d
When “
確認機能設定
” (Info notice setting) is set to “
ボイス
” (voice) and
s
(MEMO/CHECK) is pressed
with a FOMA terminal folded, the FOMA terminal reads out the current time in Japanese.
<Record message>
MENU55
Having the Caller Leave a Message and Video
When you cannot answer a voice or videophone call, this function allows you to record a message
from the caller on your FOMA terminal. For videophone messages, the camera image of the other
party’s phone is also recorded.
d
You can record up to 5 voice messages lasting roughly 20 seconds each.
d
You can record up to 2 videophone messages lasting roughly 20 seconds each.
d The differences between Record message and Voice Mail are as follows:
* ： As of August 2006, this service is not provided.
Setting Record message
1
i
X X “Incoming call” X “Record message” X Select any item
* ： Not displayed if no Voice Announce message has been recorded.
2
Enter a number between 000 and 120 seconds as the ring time
Entering a 3-digit time automatically sets Record message and “ ” and “ ” appear on the standby
screen.
■ To set the displayed time
X Without entering a time, press
d
Default setting Record message: OFF Answer message: Japanese 1 Ring time: 8 sec.
Item Record message Voice Mail service
Recording time
and No. of
messages a Voice call: up to 20 seconds each, 5 messages
a Videophone call: up to 20 seconds each, 2
messages
a Voice call: up to 3 minutes each, 20 messages
a Videophone call
*
: up to 3 minutes each, 20
messages
Retention period No limit Up to 72 hours
Where to store FOMA terminal Voice Mail service center
Condition for
playback Anywhere Only inside the service area
Condition for
recording
a
Messages can be recorded if the receiving
phone is turned on inside the service area.
a
Setting “Record message” to “ON”
a
Messages can be recorded even if the
receiving phone is turned off inside/outside the
service area.
a
Activating the Voice Mail service (p.424)
ON Selects the type of answer message.
Japanese 1 “I can’t answer the phone just now. Please leave your message within 20 seconds
after the beep.” is played in Japanese.
Japanese 2 “Thank you for your call, but I can’t take your call right now. Leave me a message after
the beep.” is played in Japanese.
English “I can’t take your call now. Please leave the message. Thank you.” is played.
Voice
announce 1
*
Plays the message recorded using “Voice announce”.
“Recording and Playing Alarm Tones and On Hold Tones”
→
p.412
Voice
announce 2
*
OFF Cancels the “Record message” setting.
NOTE
e
If the numbers of recorded voice messages and VP messages have already reached the respective maximum
numbers, Record message cannot be set to “ON”.
e You can check the selected answer message by pressing
o
(Play) on the answer message selection screen.
e
If “Voice announce 1” or “Voice announce 2” is set for the answer message of Record message and the
corresponding Voice announce is deleted in “Voice announce” setting, “Japanese 1” is set for the answer message.
e
To give priority to “Record message” when “Voice Mail” or “Call Forwarding” is set at the same time, set a shorter
ring time than the one set for Voice Mail or Call Forwarding.