Foma N902iX, Manual

Page: 164 / 574

162
Security Settings
<S
ec
re
t mod
e/
Sec
re
t da
ta
onl
y mod
e>
Viewing only secret data <Secret data only mode>
1
i
X X
“Lock/Security”
X
“Secret data only
mode” X Enter your security code
Secret data only mode is set and “ ” flashes.
Icons shown when other lock functions are set at the same time → p.28
■ To cancel Secret data only mode
X
y
Secret data only mode is canceled and “ ” disappears.
2
Search the phonebook or check your schedule
Searching the phonebook → p.115
Checking your schedule → p.407
NOTE
e
Selecting “Set secret” from the phonebook detail function menu also enables you to store a phonebook entry as
secret data.
e
In Secret mode, “ ” flashes when you select or show secret data or show a Secret folder or data stored in a
Secret folder.
e
“Phonebook” or “Schedule” entries stored as secret data can only be accessed, edited, deleted or referred in
Secret mode or Secret data only mode. When a FOMA terminal is in normal mode, you will be notified of scheduled
events stored as secret data by an alarm, while no alarm message appears.
e
If a “Phonebook” entry stored as secret data is assigned to a memory number between “000” and “009”, “Two-
touch dialing” can only be used to call that number when a FOMA terminal is in Secret mode or Secret data only
mode.
e
Phonebook entries stored as secret data are also stored as secret data in the PushTalk phonebook.
e
If the caller of an incoming call is stored as secret data and shows the caller ID, not the name but the phone number
appears. Only the phone number appears also on “Received calls”. However, setting Secret mode or Secret data
only mode shows the name stored in the “Received calls” record.
e
If Secret mode or Secret data only mode is released and you receive a mail from a sender stored as secret data,
not the name but the mail address appears. The mail address is not stored in the “Received address” record.
e
The following functions cannot be set for “Phonebook” entries stored as secret data:
a
Automatic display → p.124
a
Restrictions → p.172
a
Discern connect → p.122
e
If you edit a “Phonebook” or “Schedule” entry in Secret mode, the edited entry is stored as secret data. If a
phonebook entry is edited, all the data stored in the edited phonebook entry are stored as secret data.
e
You can also cancel Secret mode or Secret data only mode by pressing
i
X X
“Lock/Security” and then
selecting “Secret mode” or “Secret data only mode”.
e
If “Lock all/Omakase Lock” is set at the same time as “Secret mode” or “Secret data only mode”, releasing “Lock all/
Omakase Lock” also cancels “Secret mode” or “Secret data only mode”.
e
If you receive a call while editing the phonebook or schedule, viewing the schedule or viewing the results of a
phonebook search in Secret mode or Secret data only mode, the Secret mode or Secret data only mode is
canceled. Subsequently when you return to the phonebook or schedule screen and resume the interrupted
operation, the security code entry screen appears. When you enter your security code on the screen, Secret mode
or Secret data only mode is set and you can then continue the operation.
e
When you make a call or send a mail by accessing a phonebook entry stored as Secret data, “Redial”, “Dialed
calls” or “Sent address” is not updated.
MENU41
Ｓｅｃｒｅｔ ｄａｔａ
Ｐｈｏｎｅｂｏｏｋ ５
Ｓｃｈｅｄｕｌｅ ５
Ｓｅｃｒｅｔ ｄａｔａ ｏｎｌｙ ｍｏｄｅ