Foma N902iX, Manual

Page: 149 / 574

147
Tone/Display/Li
g
htin
g
Settin
g
s
<Ill
umination>
MENU
8
9
<Illumination>
MENU89
Specifying How the Incoming Call Lamp Flashes for Incoming Calls and Mails
Use this procedure to set the color and pattern (flash pattern) in which the incoming call lamp flashes when
you receive voice calls, videophone calls, Push-to-Talk calls, mails, chat mails or MessageR/MessageF.
d You can set different flash colors respectively for incoming calls and messages from particular phone
numbers, e-mail addresses or groups.
→ p.122
d
The flash pattern for
o
and
p
is the same as for the incoming call lamp.
1
i
X X
“Incoming call”
X
“Illumination”
X
Select any item
<Illumination in talk>
Specifying How the Incoming Call Lamp Flashes During a Call
This function allows you to set the color in which the incoming call lamp flashes during a voice,
videophone or Push-to-Talk call.
1
i
X X
“Talk”
X
“Illumination in talk”
X
Select a color
OFF: The incoming call lamp does not flash.
Color 1 to 7: The lamp flashes in the selected color.
Gradation 1: The lamp flashes changing the color.
Gradation 2: The lamp lights up changing the color.
Gradation 3: The lamp color quickly changes.
Default setting Phone: Color 5 Videophone: Color 5 PushTalk: Color 5 Mail: Color 1 Chat mail: Color 3
MessageR: Color 1 MessageF: Color 1 Set pattern: Standard Adjust color: Color 1-12
Set color Selects the flash color of the incoming call lamp for “Phone”, “Videophone”, “PushTalk”, “Mail”, “Chat
mail”, “MessageR” and “MessageF”.
The incoming call lamp flashes in the selected color during selection.
Color 1 to 12: The lamp flashes in the selected color.
Gradation: The lamp flashes in the colors 1 to 12 in numeric order.
Set pattern Selects the flash pattern of the incoming call lamp.
Standard Sets the flash pattern to Standard (flashing at 0.5 sec interval).
Melody linkage Sets the flash pattern to Melody linkage.
Adjust color Sets the color.
Edit color name X Select a color X Enter the color name
A color name can contain up to 10 double-byte or 20 single-byte characters.
Adjust color tone
X
Select a color
X
Use
b
to adjust the color tone
NOTE
e
If “Pattern 1-4” is selected in the Ring tone settings, the incoming call lamp flashes according to the ring tone
regardless of the settings of this function.
e
If no flash pattern corresponding to the melody is set for the ring tone or Chaku-motion is set, the “Standard”
pattern is used regardless of the “Melody linkage” setting.
e
While a FOMA terminal is exchanging data with the miniSD memory card, the incoming call lamp flashes in “Color
5” (green) regardless of the settings of this function (the lamp may not flash depending on the exchange function).
<Incoming call lamp priority sequence>
e Priority is assigned as follows for the incoming call lamp operation when call/mail settings are duplicated:
① Illumination for Discern connect → p.123 ② Illumination for Discern group → p.123
③
Illumination
NOTE
e
While a message is recorded, a recorded message is played or an incoming call is held, the incoming call lamp
flashes in the same pattern as while you are talking.
Default setting
OFF