Foma N902iX, Manual

Page: 150 / 574

148
Tone/Display/Lighting Settings
<Ca
ll t
ime
di
spl
a
y
>
MENU
4
8
<Call time display>
MENU48
Having a FOMA Terminal Show the Call Time During a Call
Use this function to specify whether to have a FOMA terminal show the call time during a voice,
videophone, Push-to-Talk call.
d
If the call time exceeds “19 hours, 59 minutes, 59 seconds”, the count restarts from “0 seconds”.
d The shown call time is intended solely as a guide and should not be used as an accurate figure.
d
The call time is not counted during i-mode or packet communication.
1
i
X X
“Call time/Charge”
X
“Call time display”
X
“ON”
■
To hide the call time
X “OFF”
<Font>
MENU66
Changing the Font
Use this procedure to customize the font (typeface) of the text shown on a screen or the image
display.
1
i
X X “Display” X “Font” X Select any item
<Clock display>
MENU39
Setting the Clock Display
You can set the language mode (Japanese or English) of days shown on the standby screen, the
clock display size or whether to show the world clock. You can also hide the date and clock.
d
If a screen is not standby, the small clock appears at the bottom of the screen regardless of the settings of
this function.
→
p.29
1
i
X X “Clock” X “Clock display” X Select any item
NOTE
e
The call time is reset to 0 second every time you switch the call mode between voice and videophone. However, if
you switch the call mode and end a videophone call, the call time shown indicates the total time of the voice and
videophone calls.
Default setting Type: Font 1 Thickness: Medium
Type Selects the font type between “Font 1” and “Font 2”. A sample of the selected font appears on the bottom
of the screen.
Thickness Selects the thickness among “Thin”, “Medium” and “Bold”. A text sample using the selected thickness
appears on the bottom of the screen.
NOTE
e
“Font 2” is only available for alphabetic letters (double-byte or single-byte), numbers (double-byte or single-byte),
hiragana and katakana (double-byte or single-byte), some symbols, Greek letters and Russian letters. All other
characters such as kanji are shown using “Font 1”. Text used for phone number entry or clock display also cannot
be changed to “Font 2”.
e
Changing this function does not affect the thickness of text on the image display.
Default setting Display: ON Size: Big Display type: World watch OFF
Display Chooses between “ON” and “OFF”.
Size Big Shows the date and large clock.
Small Shows the date and small clock.
Down Small Shows the small clock at the bottom of the screen.
Display type Chooses between “World watch OFF” and “World watch ON”.
NOTE
e
The world clock is only available when “Size” is set to “Small”.
e
When “Size” is set to “Down Small” and “Telop display setting” for i-channel is set to “ON” or “Receiving”, the clock
is hidden while the telop text appears.
Default setting
ON