Foma N902iX, Manual

Page: 132 / 574

130
Tone/Display/Lighting Settings
<S
oun
d ef
fe
c
t>
MENU
6
4
What is 3D Sound?
The 3D sound function uses the stereo speaker (or stereo earphone set) to produce 3 dimensional
and resonating sounds. This function allows you to enjoy i-
α
ppli-based games and melody playback
with richer and more realistic sounds.
How to enjoy 3D sound
d
To enjoy 3D sound to the fullest, positioning a FOMA terminal at the front of
you and holding it approximately 20 to 30cm away from you will produce the
best results.
d
If you listen at an off-center position or you are too close or too far away from a
FOMA terminal, the effect may be diminished.
d
The 3D effect differs depending upon the individual. If 3D sound bothers you,
set “Surround”, “3Dsound” and “SRS_WOW” (p.130) all to “OFF”.
<Sound effect>
MENU64
Setting Sound Effects for Ring Tones and Melodies
Use this function to get a richer fuller sound when a FOMA terminal plays melodies, ring tones for
voice calls, videophone calls and Push-to-Talk calls, sound effects and i-motion sound.
1
i
X X
“Incoming call”
X
“Sound effect”
X
Set “ON” or “OFF” for
the following
Adding sound effects to i-motion playback sound
When you play an i-motion using sound effects, the sound effects simultaneously enhance the sound
played through the speaker and earphones. Sound played through the speaker is enhanced by effects
that provide clearly defined voice and music audio, and stereo sound played through earphones is
enhanced by effects that provide a natural-sounding 3D sound field and rich low tones as well as
clearly defined voice and music audio.
d
i-motion programs using sound effects can be identified by the icon shown on the Movie List screen.
→ p.345
<Ring tone priority sequence>
e
Priority is assigned as follows for the ring tone operation when voice call/videophone call settings are duplicated.
①
Ring tone for Multi Number (Additional Number 1 and 2)
→
p.431
② Ring tone for Discern connect → p.122 ③ Ring tone for Discern group → p.122
④ Ring tone for Select ring tone (videophone call) → p.128
⑤ Ring tone for Call setting w/o ID → p.174
⑥
Ring tone for Select ring tone (except videophone call)
→
p.128
Discern connect or Discern group priority sequence is as follows:
① i-motion for Ring tone ② i-motion for Image
③ i-motion (without images, such as singer’s voice), melody for Ring tone or Chaku-Uta-Full
®
Priority sequence for ring tone when mail settings are duplicated
→
pp.260, 289
Default setting Surround: OFF 3Dsound: ON SRS_WOW: OFF
Surround Sets natural 3-dimensional sound. The sound you are playing sounds like it is further away from the
actual position of the 2 speakers.
3Dsound Plays 3 dimensional stereophonic sound from the stereo speakers.
SRS_WOW “Adding sound effects to i-motion playback sound”
→
p.130