Foma N902iX, Manual

Page: 535 / 574

18
5
Enter the connection name,
select the connection method
and click “
次へ ” (Next)
You can specify the name of the connection.
Enter a name easy to recognize in the “
接続名 ”
(Connection name) column.
You cannot use the following reserved
characters: ¥/:
＊ ?!<> │ (half-pitch only).
Select “PPP 接続 ” (PPP connection) for “ 接続方
式 ” (Connection method).
Select “ 発信者番号通知を行う ” (Notify caller
ID) for the caller ID settings.
6
Specify a user name and
password, select the accessible
user and click “
次へ ” (Next)
You can leave user name and password blank
for the mopera U or mopera connection.
When “
すべてのユーザー ” (All users) is
selected in the “ 使用可能ユーザーの選択 ”
(Selecting accessible user) column, the
connection setting is applied to all the users
registered in Windows.
7
Check “ 最適化を行う ” (Optimize the setting) and click “ 次へ ” (Next)
Optimize “W-TCP 設定 ” (W-TCP settings) required for “Packet communication”. If they are already
optimized, this screen does not appear.
8
Click “
はい
” (Yes)
9
Check the setting information
and click “
完了
” (Finish)
The contents of the settings are listed. Make
sure that all settings are correct.
Checking “
デスクトップにダイヤルアップの
ショートカットを作成する ” (Add dial-up
shortcut on desktop) automatically creates a
shortcut icon.
To change any setting, click “
戻る ” (Back).
10
Click “OK”
You need to restart the PC to enable the changes in the settings. If the restart selection screen
appears, click “
はい ” (Yes).
Execute communication. → p.23