Foma N902iX, Manual

Page: 524 / 574

7
Setting the PC
The following procedure explains how to connect the FOMA terminal to PC and how to install
the N902iX HIGH-SPEED communication setting file (drivers).
Connecting the FOMA terminal to PC
1
Start up Windows and insert the “CD-ROM for FOMA N902iX HIGH-
SPEED” in the CD-ROM drive of your PC
2
Click “ 終了 ” (Exit) to exit from
the “FOMA N902iX HIGH-
SPEED
ご利用にあたって
” (To
use FOMA N902iX HIGH-SPEED)
screen
This screen usually appears automatically
when the “CD-ROM for FOMA N902iX HIGH-
SPEED” is inserted in the drive. If it does not
appear, simply proceed to Step 4.
If this screen appears while you are installing
the N902iX HIGH-SPEED communication
setting file, click “
終了 ” (Exit) as well.
3
Click “ 終了 ” (Exit) to close “ お問い合わせ先 ” (Inquiries) screen
4
Turn on the FOMA terminal, then connect the FOMA USB Cable
(optional) to your FOMA terminal
5
Connect the FOMA USB Cable to the USB terminal of the PC
“ 新しいハードウェアの検出ウィザード ” (Find new hardware wizard) screen appears.