Foma N902iX, Manual

Page: 531 / 574

14
7
Check the name of program
folder and click “
次へ
” (Next)
If you want to change it, enter a new folder
name and click “
次へ ” (Next).
8
Click “ 完了 ” (Finish)
When the setup process is completed, the “FOMA PC 設定ソフト ” (FOMA PC setting software)
operation screen appears. You can specify various settings at this point.
Notes on installation of the FOMA PC setting software
<If the Previous W-TCP setting software is installed>
a
Open “ アプリケーション（プログラム）の追加と削除 ” (Add/Remove programs) and delete the
old W-TCP setting software.
<If the Previous APN setting software is installed>
a When you click “OK”, the previous APN setting software is automatically uninstalled, and the
FOMA PC setting software will be installed.
<If the FOMA PC setting software is already installed>
a
Click “OK”, and the install is interrupted. Open “ アプリケーション（プログラム）の追加と削除 ”
(Add/Remove programs), uninstall the already installed “FOMA PC
認定ソフト
” (FOMA PC
setting software), and then reinstall the software.
a
Perform the same procedure when an old version of “FOMA PC setting software” is installed.
<If the “ キャンセル ” (Cancel) button is clicked during installation>
a
When you want to continue the installation, click “
いいえ
” (No). When you want to stop the
procedure, click “ はい ” (Yes).